Blog

Uncategorized

AT-70

S_2012122811380741YBThe AT-70 is a UHF antenna that stabilizes signal receiving and prevents impedance interference from nearby objects because its vertical 1/4 wave antenna is surrounded by horizontal antennas set at a 45° degree angle, causing a 1/2 wave dipole antenna effect. The AT-70 has higher positive gain than a 1/4 wave single rod antenna and smoother impedance within the 620 ~ 960 MHz band. Therefore, the length of the antenna does not need to be adjusted while receiving and the antenna is able to reduce interference by filtering signals outside the optimal range. Its 50 Ω impedance matches with regular 50 Ω impedance antenna cables. It is suggested it should be installed at the central location of a hall, on the wall, inverted on a ceiling, or mounted on a tripod (MS-30).

Advertisements
Uncategorized

AT-70w

S_201508281403510W6A

AT-70W is a bi-functional omni-directional antenna for professional receiving and transmitting applications. Optimized for 470~1000 MHz, which is fully compatible with US and EU new telecom regulations. It has a 2~4 dBi gain which is ideal for any specific installation required with full directions. It can be easily distinguished by its new “W-Shape” appearance.

AT-70W has two input connectors, “TX/RX” which can be connected to transmitter or receiver directly. The “RX Only” connector has a built-in 12 dB high gain booster provides increased reception range for ACT receiver.

AT-70W offers users the options of transmitting or receiving based on actual application. Built-in booster power can be provided from a MIPRO AD-707a or ACT Series receivers through the coaxial cables. AT-70W is waterproof and ideal for both indoor and outdoor applications.
Uncategorized

Antennas

AT-70W Wideband Transmitting & Receiving Omni-directional Antenna

AT-70W is a bi-functional omni-directional antenna for professional receiving and transmitting applications. Optimized for 470~1000 MHz, which is fully compatible with US and EU new telecom regulations.

AT-70 UHF Ground Plane Antenna

The AT-70 is a UHF antenna that stabilizes signal receiving and prevents impedance interference from nearby objects because its vertical 1/4 wave antenna is surrounded by horizontal antennas set at a 45° degree angle, causing a 1/2 wave dipole antenna effect.

Uncategorized

Wireless Microphones

miproact312

The innovative ACT-3 Series wireless microphone systems are a culmination of years of extensive design and manufacturing experience. No wiring and adjustment required as PCB, LCD and front panel are integrated. Featuring 1/2U receivers of single-channel ACT311 & dual-channel ACT-312 and 1U receivers of single-channel ACT300 & dual-channel ACT-312T.
EIA standard 19” rack-mountable metal chassis is used instead of cheap plastics. Featuring backlit LCD instead LED display for ease of use and professional appearance.  PLL-synthesized technology for RF stability and matched with rugged ACT-30H & ACT-30T transmitters.
Uncategorized

Australian Monitor AMC+250

AMC-Plus-250-frontThe Australian Monitor AMC+250 takes the rugged reliability of the famous AMIS range and delivers the same high quality audio reinforcement, in a low cost, 2 rack unit package. The AMC+250 has 4 XLR microphone and dual RCA line inputs with input 1 having priority over inputs 2-4 (defeat able) and global 12VDC phantom power.

Features
  • 250 watt
  • 2 RU rack mountable chassis
  • 4 XLR microphone/dual RCA line inputs
  • 100 volt or 4 ohm output
  • Input 1 vox muting priority (internally defeat able)
  • Alert/Evac/Pre Announce/Bell tone board available
  • 12VDC phantom power

Brochure

Uncategorized

Australian Monitor AMC+120

AMC-Plus-120-front4 Input Mixer amplifier 120 Watts

The Australian Monitor AMC+120 takes the rugged reliability of the famous AMIS range and delivers the same high quality audio reinforcement, in a low cost, 2 rack unit package. The AMC+120 has 4 XLR microphone and dual RCA line inputs with input 1 having priority over inputs 2-4 (defeat able) and global 12VDC phantom power.

Features
  • 120 watt
  • 2 RU rack mountable chassis
  • 4 XLR microphone/dual RCA line inputs
  • 100 volt or 4 ohm output
  • Input 1 vox muting priority (internally defeat able)
  • Alert/Evac/Pre Announce/Bell tone board available
  • 12VDC phantom power

Brochure

Uncategorized

Australian Monitor AMIS120

AMIS120-frontNew 6 Channel Mixer Amplifier 120 Watts

The AMIS120 has been the most successful and reliable amplifiers from Australian Monitor for over 6 years. We have now made our most popular amplifiers even more contractor friendly with the addition of two extra balanced XLR microphone/dual RCA line inputs.

The AMIS120 still boasts the same reliability and excellent feature set including vox muting on channels 1 and 2 (defeat able), Bell, Pre Announce, Evac and Alert tones on board, Vox triggered output relay, VCA master level control, 15 VDC phantom power and mains or 24DVC operation. Now with more inputs available they offer even greater flexibility for commercial audio installations.

Note: North American version has 4 inputs.

Features
  • 120 watt
  • 2 RU
  • Vox muting on channels 1 and 2 (defeat able)
  • Bell, Pre Announce, Evac and Alert tones on board
  • Vox triggered output relay
  • VCA master level control
  • 15 VDC phantom power
  • Mains or 24DVC operation
  • 100 volt, 70 volt 4 or 8 ohm operation

Brochure

Uncategorized

Mixer Amplifiers

AMIS120-front

Australian Monitor AMC+120       

4 Input Mixer amplifier 120 Watts The Australian Monitor AMC+120 takes the rugged reliability of the famous AMIS range and delivers the same high quality audio reinforcement, in a low cost, 2 rack unit package

Australian Monitor AMC+250       

The Australian Monitor AMC+250 takes the rugged reliability of the famous AMIS range and delivers the same high quality audio reinforcement, in a low cost, 2 rack unit package.

Australian Monitor AMIS120       

New 6 Channel Mixer Amplifier 120 Watts The AMIS120 has been the most successful and reliable amplifiers from Australian Monitor for over 6 years. We have now made our most popular amplifiers even more contractor friendly with the addition of two extra balanced XLR microphone/dual RCA line inputs.

Australian Monitor AMIS120XL       

8 Input Mixer Amplifier 120 watt The AMIS120XL offers all the reliability of the famous AMIS series amplifiers with 8 universal inputs as well as 3 stage (defeat able) Vox priority, Vox triggered output relay, on board tone generator, 3 stage line input sensitivity switching and a wide range of additional features.

Uncategorized

Australian Monitor AM42P

AM amp 1ruThe Australian Monitor AM42P is a 1 RU four channel Class D power amplifier design. The AM42P delivers 200 watts per channel into 100 volt, 70 volt or 4 ohms. The AMD42P features front panel signal presence, clip and fault indication per channel, rear panel level controls and remote master VCA per channel.

Features
  • 1 RU, Class D design
  • 200W per channel @ 100V, 70V or 4 ohm
  • Mono or Bridge mode operation
  • Balanced phoenix inputs
  • Voltage controlled input attenuation (VCA)
  • Universal switchmode PSU with PFC

Brochure